./Ultimate.py --spec ../sv-benchmarks/c/properties/unreach-call.prp --file ../sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i --full-output --architecture 64bit
--------------------------------------------------------------------------------
Checking for ERROR reachability
Using default analysis
Version ae007674
Calling Ultimate with: /usr/bin/java -Dosgi.configuration.area=/storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/config -Xmx15G -Xms4m -jar /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/plugins/org.eclipse.equinox.launcher_1.5.800.v20200727-1323.jar -data @noDefault -ultimatedata /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data -tc /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/AutomizerReach.xml -i ../sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i -s /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/svcomp-Reach-64bit-Automizer_Default.epf --cacsl2boogietranslator.entry.function main --witnessprinter.witness.directory /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux --witnessprinter.witness.filename witness.graphml --witnessprinter.write.witness.besides.input.file false --witnessprinter.graph.data.specification CHECK( init(main()), LTL(G ! call(reach_error())) )
--witnessprinter.graph.data.producer Automizer --witnessprinter.graph.data.architecture 64bit --witnessprinter.graph.data.programhash dfcf2f97f5d09780e39c31eceb1c0c0d1fcc1deff2a07fb10c185b786befab02
--- Real Ultimate output ---
This is Ultimate 0.2.2-dev-ae00767
[2021-12-28 03:52:47,521 INFO L177 SettingsManager]: Resetting all preferences to default values...
[2021-12-28 03:52:47,522 INFO L181 SettingsManager]: Resetting UltimateCore preferences to default values
[2021-12-28 03:52:47,549 INFO L184 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring...
[2021-12-28 03:52:47,549 INFO L181 SettingsManager]: Resetting Boogie Preprocessor preferences to default values
[2021-12-28 03:52:47,552 INFO L181 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values
[2021-12-28 03:52:47,553 INFO L181 SettingsManager]: Resetting Abstract Interpretation preferences to default values
[2021-12-28 03:52:47,557 INFO L181 SettingsManager]: Resetting LassoRanker preferences to default values
[2021-12-28 03:52:47,559 INFO L181 SettingsManager]: Resetting Reaching Definitions preferences to default values
[2021-12-28 03:52:47,564 INFO L181 SettingsManager]: Resetting SyntaxChecker preferences to default values
[2021-12-28 03:52:47,564 INFO L181 SettingsManager]: Resetting Sifa preferences to default values
[2021-12-28 03:52:47,568 INFO L184 SettingsManager]: Büchi Program Product provides no preferences, ignoring...
[2021-12-28 03:52:47,568 INFO L181 SettingsManager]: Resetting LTL2Aut preferences to default values
[2021-12-28 03:52:47,569 INFO L181 SettingsManager]: Resetting PEA to Boogie preferences to default values
[2021-12-28 03:52:47,571 INFO L181 SettingsManager]: Resetting BlockEncodingV2 preferences to default values
[2021-12-28 03:52:47,571 INFO L181 SettingsManager]: Resetting ChcToBoogie preferences to default values
[2021-12-28 03:52:47,574 INFO L181 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values
[2021-12-28 03:52:47,575 INFO L181 SettingsManager]: Resetting BuchiAutomizer preferences to default values
[2021-12-28 03:52:47,576 INFO L181 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values
[2021-12-28 03:52:47,578 INFO L181 SettingsManager]: Resetting CodeCheck preferences to default values
[2021-12-28 03:52:47,581 INFO L181 SettingsManager]: Resetting InvariantSynthesis preferences to default values
[2021-12-28 03:52:47,582 INFO L181 SettingsManager]: Resetting RCFGBuilder preferences to default values
[2021-12-28 03:52:47,583 INFO L181 SettingsManager]: Resetting Referee preferences to default values
[2021-12-28 03:52:47,584 INFO L181 SettingsManager]: Resetting TraceAbstraction preferences to default values
[2021-12-28 03:52:47,586 INFO L184 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring...
[2021-12-28 03:52:47,587 INFO L184 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring...
[2021-12-28 03:52:47,587 INFO L181 SettingsManager]: Resetting TreeAutomizer preferences to default values
[2021-12-28 03:52:47,587 INFO L181 SettingsManager]: Resetting IcfgToChc preferences to default values
[2021-12-28 03:52:47,588 INFO L181 SettingsManager]: Resetting IcfgTransformer preferences to default values
[2021-12-28 03:52:47,589 INFO L184 SettingsManager]: ReqToTest provides no preferences, ignoring...
[2021-12-28 03:52:47,590 INFO L181 SettingsManager]: Resetting Boogie Printer preferences to default values
[2021-12-28 03:52:47,590 INFO L181 SettingsManager]: Resetting ChcSmtPrinter preferences to default values
[2021-12-28 03:52:47,591 INFO L181 SettingsManager]: Resetting ReqPrinter preferences to default values
[2021-12-28 03:52:47,592 INFO L181 SettingsManager]: Resetting Witness Printer preferences to default values
[2021-12-28 03:52:47,593 INFO L184 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring...
[2021-12-28 03:52:47,593 INFO L181 SettingsManager]: Resetting CDTParser preferences to default values
[2021-12-28 03:52:47,593 INFO L184 SettingsManager]: AutomataScriptParser provides no preferences, ignoring...
[2021-12-28 03:52:47,594 INFO L184 SettingsManager]: ReqParser provides no preferences, ignoring...
[2021-12-28 03:52:47,594 INFO L181 SettingsManager]: Resetting SmtParser preferences to default values
[2021-12-28 03:52:47,595 INFO L181 SettingsManager]: Resetting Witness Parser preferences to default values
[2021-12-28 03:52:47,595 INFO L188 SettingsManager]: Finished resetting all preferences to default values...
[2021-12-28 03:52:47,596 INFO L101 SettingsManager]: Beginning loading settings from /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/svcomp-Reach-64bit-Automizer_Default.epf
[2021-12-28 03:52:47,625 INFO L113 SettingsManager]: Loading preferences was successful
[2021-12-28 03:52:47,625 INFO L115 SettingsManager]: Preferences different from defaults after loading the file:
[2021-12-28 03:52:47,626 INFO L136 SettingsManager]: Preferences of UltimateCore differ from their defaults:
[2021-12-28 03:52:47,626 INFO L138 SettingsManager]: * Log level for class=de.uni_freiburg.informatik.ultimate.lib.smtlibutils.quantifier.QuantifierPusher=ERROR;
[2021-12-28 03:52:47,626 INFO L136 SettingsManager]: Preferences of Boogie Procedure Inliner differ from their defaults:
[2021-12-28 03:52:47,627 INFO L138 SettingsManager]: * Ignore calls to procedures called more than once=ONLY_FOR_SEQUENTIAL_PROGRAMS
[2021-12-28 03:52:47,627 INFO L136 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults:
[2021-12-28 03:52:47,628 INFO L138 SettingsManager]: * Create parallel compositions if possible=false
[2021-12-28 03:52:47,628 INFO L138 SettingsManager]: * Use SBE=true
[2021-12-28 03:52:47,628 INFO L136 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults:
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * Overapproximate operations on floating types=true
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * Check division by zero=IGNORE
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * Pointer to allocated memory at dereference=IGNORE
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * If two pointers are subtracted or compared they have the same base address=IGNORE
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * Check array bounds for arrays that are off heap=IGNORE
[2021-12-28 03:52:47,629 INFO L138 SettingsManager]: * Check if freed pointer was valid=false
[2021-12-28 03:52:47,630 INFO L138 SettingsManager]: * Use constant arrays=true
[2021-12-28 03:52:47,630 INFO L138 SettingsManager]: * Pointer base address is valid at dereference=IGNORE
[2021-12-28 03:52:47,630 INFO L136 SettingsManager]: Preferences of RCFGBuilder differ from their defaults:
[2021-12-28 03:52:47,630 INFO L138 SettingsManager]: * Size of a code block=SequenceOfStatements
[2021-12-28 03:52:47,630 INFO L138 SettingsManager]: * SMT solver=External_DefaultMode
[2021-12-28 03:52:47,630 INFO L138 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:2024 -smt2 -in -t:2000
[2021-12-28 03:52:47,630 INFO L136 SettingsManager]: Preferences of TraceAbstraction differ from their defaults:
[2021-12-28 03:52:47,631 INFO L138 SettingsManager]: * Compute Interpolants along a Counterexample=FPandBP
[2021-12-28 03:52:47,631 INFO L138 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles
[2021-12-28 03:52:47,636 INFO L138 SettingsManager]: * Trace refinement strategy=CAMEL
[2021-12-28 03:52:47,636 INFO L138 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:2024 -smt2 -in
[2021-12-28 03:52:47,637 INFO L138 SettingsManager]: * Large block encoding in concurrent analysis=OFF
[2021-12-28 03:52:47,637 INFO L138 SettingsManager]: * Automaton type used in concurrency analysis=PETRI_NET
[2021-12-28 03:52:47,637 INFO L138 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true
[2021-12-28 03:52:47,637 INFO L138 SettingsManager]: * SMT solver=External_ModelsAndUnsatCoreMode
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by com.sun.xml.bind.v2.runtime.reflect.opt.Injector$1 (file:/storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/plugins/com.sun.xml.bind_2.2.0.v201505121915.jar) to method java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int)
WARNING: Please consider reporting this to the maintainers of com.sun.xml.bind.v2.runtime.reflect.opt.Injector$1
WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
WARNING: All illegal access operations will be denied in a future release
Applying setting for plugin de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator: Entry function -> main
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Witness directory -> /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Witness filename -> witness.graphml
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Write witness besides input file -> false
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data specification -> CHECK( init(main()), LTL(G ! call(reach_error())) )
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data producer -> Automizer
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data architecture -> 64bit
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data programhash -> dfcf2f97f5d09780e39c31eceb1c0c0d1fcc1deff2a07fb10c185b786befab02
[2021-12-28 03:52:47,889 INFO L75 nceAwareModelManager]: Repository-Root is: /tmp
[2021-12-28 03:52:47,914 INFO L261 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized
[2021-12-28 03:52:47,917 INFO L217 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected.
[2021-12-28 03:52:47,918 INFO L271 PluginConnector]: Initializing CDTParser...
[2021-12-28 03:52:47,918 INFO L275 PluginConnector]: CDTParser initialized
[2021-12-28 03:52:47,919 INFO L432 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/../sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i
[2021-12-28 03:52:47,982 INFO L220 CDTParser]: Created temporary CDT project at /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/2ea17a371/7d39cf8cf17a4aa2ac9f7fcde5ce238c/FLAG16305834a
[2021-12-28 03:52:49,484 INFO L306 CDTParser]: Found 1 translation units.
[2021-12-28 03:52:49,485 INFO L160 CDTParser]: Scanning /storage/repos/ultimate/releaseScripts/default/sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i
[2021-12-28 03:52:49,626 INFO L349 CDTParser]: About to delete temporary CDT project at /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/2ea17a371/7d39cf8cf17a4aa2ac9f7fcde5ce238c/FLAG16305834a
[2021-12-28 03:52:50,006 INFO L357 CDTParser]: Successfully deleted /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/2ea17a371/7d39cf8cf17a4aa2ac9f7fcde5ce238c
[2021-12-28 03:52:50,009 INFO L299 ainManager$Toolchain]: ####################### [Toolchain 1] #######################
[2021-12-28 03:52:50,010 INFO L131 ToolchainWalker]: Walking toolchain with 6 elements.
[2021-12-28 03:52:50,011 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator----------------------------
[2021-12-28 03:52:50,011 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator...
[2021-12-28 03:52:50,013 INFO L275 PluginConnector]: CACSL2BoogieTranslator initialized
[2021-12-28 03:52:50,014 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.12 03:52:50" (1/1) ...
[2021-12-28 03:52:50,015 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@46be1a78 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.12 03:52:50, skipping insertion in model container
[2021-12-28 03:52:50,015 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.12 03:52:50" (1/1) ...
[2021-12-28 03:52:50,020 INFO L145 MainTranslator]: Starting translation in SV-COMP mode
[2021-12-28 03:52:50,363 INFO L178 MainTranslator]: Built tables and reachable declarations
[2021-12-28 03:52:54,407 WARN L230 ndardFunctionHandler]: Function reach_error is already implemented but we override the implementation for the call at /storage/repos/ultimate/releaseScripts/default/sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i[340009,340022]
[2021-12-28 03:53:04,793 ERROR L326 MainTranslator]: Unsupported Syntax: encountered a call to a var args function, var args are not supported at the moment: ql_dbg
[2021-12-28 03:53:04,794 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.CACSL2BoogieTranslatorObserver@47192f55 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.12 03:53:04, skipping insertion in model container
[2021-12-28 03:53:04,794 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator----------------------------
[2021-12-28 03:53:04,795 INFO L184 ToolchainWalker]: Toolchain execution was canceled (user or tool) before executing de.uni_freiburg.informatik.ultimate.boogie.procedureinliner
[2021-12-28 03:53:04,796 INFO L158 Benchmark]: Toolchain (without parser) took 14785.42ms. Allocated memory was 134.2MB in the beginning and 463.5MB in the end (delta: 329.3MB). Free memory was 51.0MB in the beginning and 313.8MB in the end (delta: -262.8MB). Peak memory consumption was 163.6MB. Max. memory is 16.1GB.
[2021-12-28 03:53:04,797 INFO L158 Benchmark]: CDTParser took 0.16ms. Allocated memory is still 56.6MB. Free memory was 38.1MB in the beginning and 38.1MB in the end (delta: 45.9kB). There was no memory consumed. Max. memory is 16.1GB.
[2021-12-28 03:53:04,797 INFO L158 Benchmark]: CACSL2BoogieTranslator took 14783.85ms. Allocated memory was 134.2MB in the beginning and 463.5MB in the end (delta: 329.3MB). Free memory was 50.8MB in the beginning and 313.8MB in the end (delta: -263.1MB). Peak memory consumption was 163.6MB. Max. memory is 16.1GB.
[2021-12-28 03:53:04,798 INFO L339 ainManager$Toolchain]: ####################### End [Toolchain 1] #######################
--- Results ---
* Results from de.uni_freiburg.informatik.ultimate.core:
- StatisticsResult: Toolchain Benchmarks
Benchmark results are:
* CDTParser took 0.16ms. Allocated memory is still 56.6MB. Free memory was 38.1MB in the beginning and 38.1MB in the end (delta: 45.9kB). There was no memory consumed. Max. memory is 16.1GB.
* CACSL2BoogieTranslator took 14783.85ms. Allocated memory was 134.2MB in the beginning and 463.5MB in the end (delta: 329.3MB). Free memory was 50.8MB in the beginning and 313.8MB in the end (delta: -263.1MB). Peak memory consumption was 163.6MB. Max. memory is 16.1GB.
* Results from de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator:
- UnsupportedSyntaxResult [Line: 13067]: Unsupported Syntax
encountered a call to a var args function, var args are not supported at the moment: ql_dbg
RESULT: Ultimate could not prove your program: Toolchain returned no result.
Received shutdown request...
--- End real Ultimate output ---
Execution finished normally
Using bit-precise analysis
Retrying with bit-precise analysis
### Bit-precise run ###
Calling Ultimate with: /usr/bin/java -Dosgi.configuration.area=/storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/config -Xmx15G -Xms4m -jar /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/plugins/org.eclipse.equinox.launcher_1.5.800.v20200727-1323.jar -data @noDefault -ultimatedata /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data -tc /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/AutomizerReach.xml -i ../sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i -s /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/svcomp-Reach-64bit-Automizer_Bitvector.epf --cacsl2boogietranslator.entry.function main --witnessprinter.witness.directory /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux --witnessprinter.witness.filename witness.graphml --witnessprinter.write.witness.besides.input.file false --witnessprinter.graph.data.specification CHECK( init(main()), LTL(G ! call(reach_error())) )
--witnessprinter.graph.data.producer Automizer --witnessprinter.graph.data.architecture 64bit --witnessprinter.graph.data.programhash dfcf2f97f5d09780e39c31eceb1c0c0d1fcc1deff2a07fb10c185b786befab02
--- Real Ultimate output ---
This is Ultimate 0.2.2-dev-ae00767
[2021-12-28 03:53:06,408 INFO L177 SettingsManager]: Resetting all preferences to default values...
[2021-12-28 03:53:06,411 INFO L181 SettingsManager]: Resetting UltimateCore preferences to default values
[2021-12-28 03:53:06,443 INFO L184 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring...
[2021-12-28 03:53:06,443 INFO L181 SettingsManager]: Resetting Boogie Preprocessor preferences to default values
[2021-12-28 03:53:06,446 INFO L181 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values
[2021-12-28 03:53:06,447 INFO L181 SettingsManager]: Resetting Abstract Interpretation preferences to default values
[2021-12-28 03:53:06,451 INFO L181 SettingsManager]: Resetting LassoRanker preferences to default values
[2021-12-28 03:53:06,453 INFO L181 SettingsManager]: Resetting Reaching Definitions preferences to default values
[2021-12-28 03:53:06,456 INFO L181 SettingsManager]: Resetting SyntaxChecker preferences to default values
[2021-12-28 03:53:06,457 INFO L181 SettingsManager]: Resetting Sifa preferences to default values
[2021-12-28 03:53:06,460 INFO L184 SettingsManager]: Büchi Program Product provides no preferences, ignoring...
[2021-12-28 03:53:06,460 INFO L181 SettingsManager]: Resetting LTL2Aut preferences to default values
[2021-12-28 03:53:06,462 INFO L181 SettingsManager]: Resetting PEA to Boogie preferences to default values
[2021-12-28 03:53:06,463 INFO L181 SettingsManager]: Resetting BlockEncodingV2 preferences to default values
[2021-12-28 03:53:06,466 INFO L181 SettingsManager]: Resetting ChcToBoogie preferences to default values
[2021-12-28 03:53:06,466 INFO L181 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values
[2021-12-28 03:53:06,467 INFO L181 SettingsManager]: Resetting BuchiAutomizer preferences to default values
[2021-12-28 03:53:06,468 INFO L181 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values
[2021-12-28 03:53:06,473 INFO L181 SettingsManager]: Resetting CodeCheck preferences to default values
[2021-12-28 03:53:06,474 INFO L181 SettingsManager]: Resetting InvariantSynthesis preferences to default values
[2021-12-28 03:53:06,475 INFO L181 SettingsManager]: Resetting RCFGBuilder preferences to default values
[2021-12-28 03:53:06,475 INFO L181 SettingsManager]: Resetting Referee preferences to default values
[2021-12-28 03:53:06,477 INFO L181 SettingsManager]: Resetting TraceAbstraction preferences to default values
[2021-12-28 03:53:06,488 INFO L184 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring...
[2021-12-28 03:53:06,488 INFO L184 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring...
[2021-12-28 03:53:06,488 INFO L181 SettingsManager]: Resetting TreeAutomizer preferences to default values
[2021-12-28 03:53:06,489 INFO L181 SettingsManager]: Resetting IcfgToChc preferences to default values
[2021-12-28 03:53:06,490 INFO L181 SettingsManager]: Resetting IcfgTransformer preferences to default values
[2021-12-28 03:53:06,491 INFO L184 SettingsManager]: ReqToTest provides no preferences, ignoring...
[2021-12-28 03:53:06,491 INFO L181 SettingsManager]: Resetting Boogie Printer preferences to default values
[2021-12-28 03:53:06,492 INFO L181 SettingsManager]: Resetting ChcSmtPrinter preferences to default values
[2021-12-28 03:53:06,493 INFO L181 SettingsManager]: Resetting ReqPrinter preferences to default values
[2021-12-28 03:53:06,494 INFO L181 SettingsManager]: Resetting Witness Printer preferences to default values
[2021-12-28 03:53:06,494 INFO L184 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring...
[2021-12-28 03:53:06,495 INFO L181 SettingsManager]: Resetting CDTParser preferences to default values
[2021-12-28 03:53:06,495 INFO L184 SettingsManager]: AutomataScriptParser provides no preferences, ignoring...
[2021-12-28 03:53:06,495 INFO L184 SettingsManager]: ReqParser provides no preferences, ignoring...
[2021-12-28 03:53:06,496 INFO L181 SettingsManager]: Resetting SmtParser preferences to default values
[2021-12-28 03:53:06,496 INFO L181 SettingsManager]: Resetting Witness Parser preferences to default values
[2021-12-28 03:53:06,497 INFO L188 SettingsManager]: Finished resetting all preferences to default values...
[2021-12-28 03:53:06,498 INFO L101 SettingsManager]: Beginning loading settings from /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/config/svcomp-Reach-64bit-Automizer_Bitvector.epf
[2021-12-28 03:53:06,528 INFO L113 SettingsManager]: Loading preferences was successful
[2021-12-28 03:53:06,529 INFO L115 SettingsManager]: Preferences different from defaults after loading the file:
[2021-12-28 03:53:06,529 INFO L136 SettingsManager]: Preferences of UltimateCore differ from their defaults:
[2021-12-28 03:53:06,530 INFO L138 SettingsManager]: * Log level for class=de.uni_freiburg.informatik.ultimate.lib.smtlibutils.quantifier.QuantifierPusher=ERROR;
[2021-12-28 03:53:06,531 INFO L136 SettingsManager]: Preferences of Boogie Procedure Inliner differ from their defaults:
[2021-12-28 03:53:06,531 INFO L138 SettingsManager]: * Ignore calls to procedures called more than once=ONLY_FOR_SEQUENTIAL_PROGRAMS
[2021-12-28 03:53:06,532 INFO L136 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults:
[2021-12-28 03:53:06,532 INFO L138 SettingsManager]: * Create parallel compositions if possible=false
[2021-12-28 03:53:06,532 INFO L138 SettingsManager]: * Use SBE=true
[2021-12-28 03:53:06,532 INFO L136 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults:
[2021-12-28 03:53:06,533 INFO L138 SettingsManager]: * Check division by zero=IGNORE
[2021-12-28 03:53:06,533 INFO L138 SettingsManager]: * Pointer to allocated memory at dereference=IGNORE
[2021-12-28 03:53:06,533 INFO L138 SettingsManager]: * If two pointers are subtracted or compared they have the same base address=IGNORE
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Check array bounds for arrays that are off heap=IGNORE
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Adapt memory model on pointer casts if necessary=true
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Use bitvectors instead of ints=true
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Memory model=HoenickeLindenmann_4ByteResolution
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Check if freed pointer was valid=false
[2021-12-28 03:53:06,534 INFO L138 SettingsManager]: * Use constant arrays=true
[2021-12-28 03:53:06,535 INFO L138 SettingsManager]: * Pointer base address is valid at dereference=IGNORE
[2021-12-28 03:53:06,535 INFO L136 SettingsManager]: Preferences of RCFGBuilder differ from their defaults:
[2021-12-28 03:53:06,535 INFO L138 SettingsManager]: * Size of a code block=SequenceOfStatements
[2021-12-28 03:53:06,535 INFO L138 SettingsManager]: * SMT solver=External_DefaultMode
[2021-12-28 03:53:06,535 INFO L138 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:2024 -smt2 -in -t:2000
[2021-12-28 03:53:06,535 INFO L136 SettingsManager]: Preferences of TraceAbstraction differ from their defaults:
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Compute Interpolants along a Counterexample=FPandBP
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Trace refinement strategy=WOLF
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Command for external solver=cvc4 --incremental --print-success --lang smt
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Large block encoding in concurrent analysis=OFF
[2021-12-28 03:53:06,536 INFO L138 SettingsManager]: * Automaton type used in concurrency analysis=PETRI_NET
[2021-12-28 03:53:06,537 INFO L138 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true
[2021-12-28 03:53:06,537 INFO L138 SettingsManager]: * SMT solver=External_ModelsAndUnsatCoreMode
[2021-12-28 03:53:06,537 INFO L138 SettingsManager]: * Logic for external solver=AUFBV
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by com.sun.xml.bind.v2.runtime.reflect.opt.Injector$1 (file:/storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/plugins/com.sun.xml.bind_2.2.0.v201505121915.jar) to method java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int)
WARNING: Please consider reporting this to the maintainers of com.sun.xml.bind.v2.runtime.reflect.opt.Injector$1
WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
WARNING: All illegal access operations will be denied in a future release
Applying setting for plugin de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator: Entry function -> main
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Witness directory -> /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Witness filename -> witness.graphml
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Write witness besides input file -> false
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data specification -> CHECK( init(main()), LTL(G ! call(reach_error())) )
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data producer -> Automizer
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data architecture -> 64bit
Applying setting for plugin de.uni_freiburg.informatik.ultimate.witnessprinter: Graph data programhash -> dfcf2f97f5d09780e39c31eceb1c0c0d1fcc1deff2a07fb10c185b786befab02
[2021-12-28 03:53:06,811 INFO L75 nceAwareModelManager]: Repository-Root is: /tmp
[2021-12-28 03:53:06,829 INFO L261 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized
[2021-12-28 03:53:06,831 INFO L217 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected.
[2021-12-28 03:53:06,832 INFO L271 PluginConnector]: Initializing CDTParser...
[2021-12-28 03:53:06,833 INFO L275 PluginConnector]: CDTParser initialized
[2021-12-28 03:53:06,834 INFO L432 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/../sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i
[2021-12-28 03:53:06,886 INFO L220 CDTParser]: Created temporary CDT project at /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/6963d2ca8/231f2c7b7d18488ab49f7a21c928454d/FLAG25430fd6c
[2021-12-28 03:53:08,669 INFO L306 CDTParser]: Found 1 translation units.
[2021-12-28 03:53:08,669 INFO L160 CDTParser]: Scanning /storage/repos/ultimate/releaseScripts/default/sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i
[2021-12-28 03:53:08,783 INFO L349 CDTParser]: About to delete temporary CDT project at /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/6963d2ca8/231f2c7b7d18488ab49f7a21c928454d/FLAG25430fd6c
[2021-12-28 03:53:08,869 INFO L357 CDTParser]: Successfully deleted /storage/repos/ultimate/releaseScripts/default/UAutomizer-linux/data/6963d2ca8/231f2c7b7d18488ab49f7a21c928454d
[2021-12-28 03:53:08,871 INFO L299 ainManager$Toolchain]: ####################### [Toolchain 1] #######################
[2021-12-28 03:53:08,872 INFO L131 ToolchainWalker]: Walking toolchain with 6 elements.
[2021-12-28 03:53:08,874 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator----------------------------
[2021-12-28 03:53:08,874 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator...
[2021-12-28 03:53:08,877 INFO L275 PluginConnector]: CACSL2BoogieTranslator initialized
[2021-12-28 03:53:08,877 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.12 03:53:08" (1/1) ...
[2021-12-28 03:53:08,878 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@4f06d815 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.12 03:53:08, skipping insertion in model container
[2021-12-28 03:53:08,878 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.12 03:53:08" (1/1) ...
[2021-12-28 03:53:08,883 INFO L145 MainTranslator]: Starting translation in SV-COMP mode
[2021-12-28 03:53:09,245 INFO L178 MainTranslator]: Built tables and reachable declarations
[2021-12-28 03:53:12,791 WARN L230 ndardFunctionHandler]: Function reach_error is already implemented but we override the implementation for the call at /storage/repos/ultimate/releaseScripts/default/sv-benchmarks/c/ldv-linux-3.12-rc1/linux-3.12-rc1.tar.xz-118_1a-drivers--scsi--qla2xxx--qla2xxx.ko-entry_point.cil.out.i[340009,340022]
[2021-12-28 03:53:23,428 ERROR L326 MainTranslator]: Unsupported Syntax: encountered a call to a var args function, var args are not supported at the moment: ql_dbg
[2021-12-28 03:53:23,428 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.CACSL2BoogieTranslatorObserver@68a96f55 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.12 03:53:23, skipping insertion in model container
[2021-12-28 03:53:23,429 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator----------------------------
[2021-12-28 03:53:23,429 INFO L184 ToolchainWalker]: Toolchain execution was canceled (user or tool) before executing de.uni_freiburg.informatik.ultimate.boogie.procedureinliner
[2021-12-28 03:53:23,430 INFO L158 Benchmark]: Toolchain (without parser) took 14557.27ms. Allocated memory was 144.7MB in the beginning and 425.7MB in the end (delta: 281.0MB). Free memory was 60.9MB in the beginning and 299.2MB in the end (delta: -238.3MB). Peak memory consumption was 173.1MB. Max. memory is 16.1GB.
[2021-12-28 03:53:23,431 INFO L158 Benchmark]: CDTParser took 0.38ms. Allocated memory is still 48.2MB. Free memory was 30.2MB in the beginning and 30.2MB in the end (delta: 31.5kB). There was no memory consumed. Max. memory is 16.1GB.
[2021-12-28 03:53:23,432 INFO L158 Benchmark]: CACSL2BoogieTranslator took 14554.71ms. Allocated memory was 144.7MB in the beginning and 425.7MB in the end (delta: 281.0MB). Free memory was 60.6MB in the beginning and 299.2MB in the end (delta: -238.6MB). Peak memory consumption was 173.1MB. Max. memory is 16.1GB.
[2021-12-28 03:53:23,433 INFO L339 ainManager$Toolchain]: ####################### End [Toolchain 1] #######################
--- Results ---
* Results from de.uni_freiburg.informatik.ultimate.core:
- StatisticsResult: Toolchain Benchmarks
Benchmark results are:
* CDTParser took 0.38ms. Allocated memory is still 48.2MB. Free memory was 30.2MB in the beginning and 30.2MB in the end (delta: 31.5kB). There was no memory consumed. Max. memory is 16.1GB.
* CACSL2BoogieTranslator took 14554.71ms. Allocated memory was 144.7MB in the beginning and 425.7MB in the end (delta: 281.0MB). Free memory was 60.6MB in the beginning and 299.2MB in the end (delta: -238.6MB). Peak memory consumption was 173.1MB. Max. memory is 16.1GB.
* Results from de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator:
- UnsupportedSyntaxResult [Line: 13067]: Unsupported Syntax
encountered a call to a var args function, var args are not supported at the moment: ql_dbg
RESULT: Ultimate could not prove your program: Toolchain returned no result.
Received shutdown request...
--- End real Ultimate output ---
Execution finished normally
Writing output log to file Ultimate.log
Result:
UNKNOWN